GEEETECH TPU 3D Printer Flexible Filament material 1kg 2.2LBS/Spool 1.75mm Plastic Vacuum Packaging Non-Toxic Shore Hardness 95A

The worst TPU I've ever encountered. It was not noticeable on small parts, but it was worth putting a larger part, all the disadvantages appeared. 1) The winding is terrible, but you can forgive it, it’s cooling, it’s not there yet. 2) When printing, some oil is displayed, and when printing for a long time it even drips to the table. 3) The 0.6 nozzle was clogged so that when I tried to clean it with a needle, it got stuck tightly and broke. The result is a damaged 18-time print and a bonus for the problem with removing the needle failure from the nozzle. Whoever wants to repeat my mistakes, you can buy.

Very good TPU, I made it print for the first time and I wasn't disappointed, of course you should slow down the entire printing process.
This should be better for stability, I will slowly increase the speed later. The small fish from TPU is even suitable for swimsuits, my son was thrilled, now I have printed a small Frisbee disc but it probably works a bit too quickly but intact.

Arrived in 4 days. Packaging-bag, carton, vacuum bag, plastic coil. Color, well, relative. Printed on the FF ad5m-Table 50, nozzle 230, stream 1, 05, PA 0,035, Space speed-3,5 cubes. It is printed perfectly, the feed did not file, everything crawls through. In terms of softness in the product, quite hard rubber is obtained. In principle satisfied with the result, I will take more when the white color finally appears))